Nokia mobile secret codes

Secret Codes Of Nokia Mobiles:


Below we present secret codes of nokia mobile phones which are very useful for people who unlock phones and for amateurs of this topic. These special key sequences entered fromkeyboard of phone allow you to get some important information like IMEI number, release date, software version and much more. You can also choose default language, activatenetmonitor ect.


1610/1630

*#170602112302# (software version)

1610/1611

IMEI number: -*# 0 6 #
Software version: -* # 1 7 0 6 0 2 1 1 2 3 9 2 #
Simlock status: - # 9 2 7 0 2 6 8 9 #


2110

*#9999# (software version)

2110i/2110e

*#170602112302# or (depends on model)*#682371158412125# (software version)


NOKIA3110

*#06# -IMEI

*#3110# -Software version

##002# - allows to turn off voice mail.

*#7780# - restore factory settings

*#746025625#(or *#sim0clock#) - to check if clock of sim (SIM-Clock) can be stopped (SIM-Clock-stop is akind of standby mode which saces battery)

*#92702689# (or *#war0anty#) -"warranty code:"- you have to enter one of the following codes:

6232 (OK)displays month and year of production date (ie "0198")

7332 (OK) - displays date of last repair - if there is (ie. "DATE NOT SAVED")

7832 (OK) - displays date of purchase - if there is (ie. "DATE NOT SAVED")

9268 (OK) -displays serial number

37832 (OK) -sets purchase date in format MMYY (MM - month, YY - year)- attention: you can set it only once, so beware !

87267 (OK)-displays message "Confirm Transfer?" - meaning is unknown (?)

* # 9 2 7 0 2 6 8 9 # -Simlock info

*#31# (call) -sets if your phone no. will be hidden or not (works only in some networks)

*#76# (call) -sets if target phone number when you call should be displayed (works only in some networks)

*#77# (call) -(work s only in some networks)

*#33/35# (call -displays message "Service not active".

**31# (call) -your no. will not be showed to others when you make a call



3210


*#06# -IMEI

*#0000# -software version

*#92702689# (or *#war0anty#)- enters service mode.

*3370# -Turns on sound encoding system - Enhanced Full Rate.


#3370# -Turns off sound encoding system Enhanced Full Rate .

*4720# -Turns on battery save mode - saves about 30 % of energy.

#4720# -Turns off battery save mode.

xx# -Replace xx with desired phonebook entry - press # and you will see it on display.


51XX


*#06# -IMEI

*#0000# - Software version

*#92702689#( or *#war0anty#) Enter service mode.

*3370# -Turns on sound encoding system - Enhanced Full Rate.

#3370# -Turns off sound encoding system - Enhanced Full Rate.

*4720# -Turns on battery save mode - saves about 30 % of energy.

#4720# -Turns off battery save mode.

#pw+1234567890+1 -provider lock status

#pw+1234567890+2 -Network lock status

#pw+1234567890+3 -Provider lock status

#pw+1234567890+4 - SimCard lock status


NOKIA 61XX


*#06# -IMEI

*#0000# ;-*#99 99# (Nokia 6130)


*#92702689# (or *#war0anty#) Software versionEnter service mode.

*3370# -Turns on sound encoding system - Enhanced Full Rate.

#3370# -Turns off sound encoding system - Enhanced Full Rate.

*4720# -Turns on battery save mode - saves about 30 % of energy.

#4720# -Turns off battery save mode.


NOKIA8810


*#06# - IMEI

*#0000# -Software version

*#92702689# (or *#war0anty#) Enter service mode.

*3370# -Turns on sound encoding system - Enhanced Full Rate.

#3370# -Turns off sound encoding system - Enhanced Full Rate.

*4720# -Turns on battery save mode - saves about 30 % of energy

#4720# -Turns off battery save mode - saves about 30 % of energy



NOKIA99OO


*#06# -IMEI

*#682371158412125# -Software version

*#3283# -Displays week and year of manufacture, ie. 1497 means 14th week of 1997.



NOKIA 911O


*#06# IMEI


*#0000# SOFTWARE VERSION

*3370# Turns on sound encoding system - Enhanced Full Rate.

#3370# Turns off sound encoding system - Enhanced Full Rate.

*4720# Turns on battery save mode - saves about 30 % of energy.

#4720# Turns off battery save mode.



NOKIA 81XX


*#06# IMEI
*#8110# Software version
xx# Replace xx with desired phonebook entry - press # and you will see it on display

*#92702689# (or *#warOanty#)

"Warranty code:" - you have to enter one of the following codes:

9268 (OK) displays IMEI (International Mobile Equipment Identification)

6232 (OK) displays date of manufacture in format MMYY (MM - month, RR - year)


7832 (OK) displays date of purchase

7332 (OK) displays date of repair or upgrade

37832 (OK) sets date of purchase in format MMYY (MM - month, RR - year) - attention: you can set it only once, so beware !!!

87267 (OK) transmits user data/move data do service PC

Default modem driver for CDMA phones



use the following steps if you don't have your phone's modem driver.

1. Go to -> Control Panel -> Select Phone and Modem options.

2. Install a new modem on your computer. Do not allow the computer to detect a Plug and Play modem. Instead, select the Standard 33600 modem that is available as one of the default choices. (Don't worry - it will connect at 115 kbps, not 33.6 kbps).

3. Install the modem on any COM port that is available.

4. Once the modem is installed, select it and click on Properties. Under Advanced, add the following Extra Initialization command: "AT+CRM=1" (without the quotes).

5. Go to Network Connections (or dial up networking) and create a new connection using the wizard.


NOKIA CDMA CODES

Nam Set: *3001#12345#

Software Version: *#837#

Software Version: *#9999#

CDMA Mode : *#7738#

Message sending options: *#66767#

Esn Number: *#92772689#

Current Channel: *#24#

Restart Phone: *#75681#

Restart Phone: *#75682#

Nokia 8887 Nam Programming :

Nam Set: *3001#12345#

Version: *#0000#

Evrc: *#3872#

Esn/Data/Timer: *#92772689#

SID: *#743#

Help: *#4357#

Slot Cycles: *#75681# , *#75682#

Nokia 8587 Nam Programming :

Nam Set: *#626#7764726#

A-Key: #8159357022#4579# (26 digits)

A-Key: #8159357022#4547# (20 digits)

Version: *#0000#

Version: *#837#

Vocoder: *#3872#

Change language: Menu 5, 3, 1

Change DM mode: *#7678#

Debug Screen: *#8378#

Debug: *#8380#

Field Test Menu: *#83788#

SPC Unlock, Factory Reset :

Full Factory Reset: *#7370#

Resets all settings including non-user changeable items (like SPC).


NOKIA TEST MODE:

1) Turn on the phone. Press *3001#12345#

2) Select Field Test and enable it..

3) Exit from NAM.. and restart your phone..

4) you will observe a new menu " Net Monitor "..

5) type appropriate group/display code.. ( 3101 for link info, 6101 for battery info )

6) enter 0000 to back.




Common codes for Motorola (CDMA)

Motorola 7760, 7860, 2260, 8160, etc Nam Programming:

Nam Set: Fcn,0000000000000, Rcl

Nam Set: 74663#, Fcn, Fcn

Test Mode: Fcn, 00**83786633, Sto

Motorola v60c, v120c etc Nam Programming:

Nam Set: 74663#, Menu, Menu, Spc

Nam Set: Menu, 073887, * (type quickly)

Test Mode: Menu, 073887*, Spc

Debug Mode: ##33284

Force the phone into DIGITAL ONLY mode:

1) ##33284 (Debug)

2) RIGHT Softkey (Next) Twice

3) Down arrow 10 times to “PrefMod”

4) RIGHT Softkey (Change) until you see “DigOnly”

5) LEFT softkey (Exit)

6) MENU then LEFT Softkey return to idle screen

7) ##33284 (The last 4 will not display if you have done it correctly)

Motorola t182, c210, etc Nam Programming:

Nam Set: ##1111 end

Nam Set: ##298645665 end

Short Nam: ##073887 sto

Motorola v710, v730, v740, ms150, etc Nam Programming:

Nam Set: 8378*# + press 3 times NATE (spc - 071082)

Test Mode: Menu, 073887*, Spc

Service Menu: #758353266#646#

Motorola StarTac 2004 Nam Programming:

Nam Set: 5759789*#, rec key (3)times (spc - 915037)

Motorola ms200, ms230, etc Nam Programming:

Nam Set: 5759789*# (spc - 915037)

Motorola v6060 Nam Programming:

Nam Set:147*369#456*0#

MOTOROLA TEST MODE:

v60, c120, c331, etc:

1) Turn on the phone. Press MENU 0 7 3 8 8 7 *

2) The phone will require you to “Enter a Security Code”, press 000000, OK

3) Scroll down to “Test mode” choose SELECT. Scroll down to “Enable”choose SELECT. Your phone is now in test mode.

4) Signal strength is the 3_rd number down on the left hand side of the screen.

5) To toggle between regular mode and test mode: Press MODE then

quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.

6) To turn off the test mode the phone must be in regular mode, then follow

the above sequence and scroll down to where it says “DISABLE” instead of

“ENABLE” and choose select.



Common Codes for LG (CDMA)

gc-300, etc Nam Programming:

Nam Set: Menu, 9, Spc

A-key: Press “Sto” 3sec, 2539**

lgc-330w, etc Nam Programming:

Nam Set: Menu, 4, 0, Spc

A-key: 2539**

lgc-510, v111, etc Nam Programming:

Nam Set: Menu, 3, 0, Spc

A-key: 2539**

lgc-500, 800w, etc Nam Programming:

Nam Set: Menu, 9 , 0, Spc

Debug Mode: Menu, 7, 0, Fsc

Debug Mode: Menu, 8, 0, Fsc

A-key: 2539**

Lg LX,VX-series, VX4400, VX6000, etc Nam Programming:

Nam Set: ##Spc

Nam Set: Menu, 0

Advanced Settings: ##2342

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok

A-key: ##2539,ok

Reset (Life time, Clear Memory, etc): ##786

boost up ur nokia 6600 mobile Opearation speed

First go to ur To-do List (default app of ur N6600)

- Make a note and input as follows
Subject: Speed
Due Date: 01-29-2005(mm-dd-yy)
Priority: set to High
then press Done

- Make a second Note and input as follows
Subject: Qoukie
Due Date: 01-29-2005(mm-dd-yy)
Priority: set to Low
then press Done

- Do not exit yet, Press the Option of your Subject note w/c is Speed and Mark as done

- then Press the Option of your Subject note w/c is Qoukie and Mark as done

- Now, reboot ur mobile.



Note: The date doesn't matter.But givig a date of exactly one year more is recommended.



IMPORTANT NOTE-PLEASE PAY ATTENTION




This trick can be used in any nokia cell that has "to-do" as an default application"



it really works........but mind one thing.....after u do it, DO NOT forget to restart ur cell.........and after it restarts,pls wait until it becomes fully active to work.....so wait for at least 1 and a half minutes........see the magic after that.....

GSM Secret Codes

Type *#61# and press call - Check redirection status.

Cancel all redirections: ##002#

*43# to activate call waiting, to deactivate #43#.


If your phone doesn't have incoming call barring and outgoing call barring, you can try this.


For outgoing call barring dial *33*barcode*# and pres OK. To deactivate
it dial #33#barcode*#.




On any phone on any network type in **43# to enable conference calls. You can make up to 7 calls at once



If you need to block SMS reception (if you are spammed by someone) just press this code:

*35*xxxx*16#


xxxx is your Call Barring code (default is 0000).

To remove this barring type:

#35*xxxx#



If you want to hide/show your phone number when calling, put one of these codes below in front of the number that you are going to call.

(*#30# / *#31# or *31# / #31# ) Works on some networks.




Typing *0# or *nm# on the beginning of a txt message gives you
detailed delivery report on some networks.. But turn off reports in message settings before.



When the sim card-pin blocked type **042*pin2 old*newpin2*newpin2*

MOTOROLA CODES

IMEI number:
*#06#

Code to lock keys. Press together *7

Note: [] (pause) means the * key held in until box appears.


Select phone line - (use this to write things below the provider name):
[] [] [] 0 0 8 [] 1 []

Add phonebook to main menu:
[] [] [] 1 0 5 [] 1 []

Add messages to main menu:
[] [] [] 1 0 7 [] 1 []

Copy SIM memory (phonebook menu):
[] [] [] 1 0 8 [] 1 []

Eng Field options (main menu):
[] [] [] 1 1 3 [] 1 []

Slow (Frequency of search menu):
[] [] [] 1 0 1 [] 1 []

Medium (Frequency of search menu):
[] [] [] 1 0 2 [] 1 []

Fast (Frequency of search menu):
[] [] [] 1 0 3 [] 1 []

Enable EFR:
[] [] [] 1 1 9 [] 1 []

Function :
[] [] [] # # # [] 1 []


Change pin:
[] [] [] 0 0 4 [] 1 []

Unblocking using the "puk" number:
[] [] [] 0 0 5 [] 1 []



There are lots of similar codes exist. If you change the last number to 0 you can deactive that code. The 3 digit number at the middle are from 0 to 999. I put the most interesting codes. (EFR):Enhanced Full Rate Codec.



You can change GSM frequencies to 900/1800 by entering the enginnering model. Following the below steps:


enter menu and press 048263* quickly, then you will enter the secret engineering menu


under "Opcode"


input 10*0*3 for GSM 900

10*0*4 for GSM 1800

10*0*5 for GSM 1900

10*0*6 for dual band GSM 900/1800

10*0*7 for dual band GSM 850/1900



To add extra message space 4 your Motorola C350 C450 C550 or C650, press menu button, press 048263* quickly, then on the popup menu enter 47 press ok.press 50 and ok.press 1 ok.press 64 ok.press 1 ok.press 186 and ok.You will receive an extra 50 msgs memory space.Switch phone off and back on.(not tested,but it worked on ESSAR network that was bought by Hutch,and then it stopped working in hutch.)


Note: These codes are applicable to those handsets only in which pressing and holiding * key forms a [] on screen...but other codes without [] work with most of the cells...


Try to make square [] by pressing and holding * key... if it not works then try to make "p" by pressing and holding * key... if it also not works then use simply star instead of []... n if it also not works then the codes are not for your cell phone....

Mobile Zone

A to Z Samsung Secret Codes

Software version: *#9999#

IMEI number: *#06#

Serial number: *#0001#

Battery status- Memory capacity : *#9998*246#

Debug screen: *#9998*324# - *#8999*324#

LCD kontrast: *#9998*523#

Vibration test: *#9998*842# - *#8999*842#

Alarm beeper - Ringtone test : *#9998*289# - *#8999*289#

Smiley: *#9125#

Software version: *#0837#

Display contrast: *#0523# - *#8999*523#

Battery info: *#0228# or *#8999*228#

Display storage capacity: *#8999*636#

Display SIM card information: *#8999*778#

Show date and alarm clock: *#8999*782#

The display during warning: *#8999*786#

Samsung hardware version: *#8999*837#

Show network information: *#8999*638#

Display received channel number and received intensity: *#8999*9266#

*#1111# S/W Version

*#1234# Firmware Version

*#2222# H/W Version

*#8999*8376263# All Versions Together

*#8999*8378# Test Menu

*#4777*8665# GPSR Tool

*#8999*523# LCD Brightness

*#8999*377# Error LOG Menu

*#8999*327# EEP Menu

*#8999*667# Debug Mode

*#92782# PhoneModel (Wap)

#*5737425# JAVA Mode

*#2255# Call List

*#232337# Bluetooth MAC Adress

*#5282837# Java Version



Type in *#0000# on a Samsung A300 to reset the language

Master reset(unlock) #*7337# (for the new samsungs E700 x600 but not E710)

Samsung E700 type *#2255# to show secret call log (not tested)

Samsung A300, A800 phone unlock enter this *2767*637#

Samsung V200, S100, S300 phone unlock : *2767*782257378#


#*4773# Incremental Redundancy

#*7785# Reset wakeup & RTK timer cariables/variables

#*7200# Tone Generator Mute

#*3888# BLUETOOTH Test mode

#*7828# Task screen

#*#8377466# S/W Version & H/W Version

#*2562# Restarts Phone

#*2565# No Blocking? General Defense.

#*3353# General Defense, Code Erased.

#*3837# Phone Hangs on White screen.

#*3849# Restarts Phone

#*7337# Restarts Phone (Resets Wap Settings)

#*2886# AutoAnswer ON/OFF

#*7288# GPRS Detached/Attached

#*7287# GPRS Attached

#*7666# White Screen

#*7693# Sleep Deactivate/Activate

#*2286# Databattery

#*2527# GPRS switching set to (Class 4, 8, 9, 10)

#*2679# Copycat feature Activa/Deactivate

#*3940# External looptest 9600 bps

#*4263# Handsfree mode Activate/Deactivate

#*2558# Time ON

#*3941# External looptest 115200 bps

#*5176# L1 Sleep

#*7462# SIM Phase

#*7983# Voltage/Freq

#*7986# Voltage

#*8466# Old Time

#*2255# Call Failed

#*5376# DELETE ALL SMS!!!!

#*6837# Official Software Version: (0003000016000702)

#*2337# Permanent Registration Beep

#*2474# Charging Duration

#*2834# Audio Path (Handsfree)

#*3270# DCS Support Activate/Deactivate

#*3282# Data Activate/Deactivate

#*3476# EGSM Activate/Deactivate

#*3676# FORMAT FLASH VOLUME!!!

#*4760# GSM Activate/Deactivate

#*4864# White Screen

#*7326# Accessory

#*7683# Sleep variable

#*3797# Blinks 3D030300 in RED

#*7372# Resetting the time to DPB variables

#*3273# EGPRS multislot (Class 4, 8, 9, 10)

#*7722# RLC bitmap compression Activate/Deactivate

#*2351# Blinks 1347E201 in RED

#*2775# Switch to 2 inner speaker

#*7878# FirstStartup (0=NO, 1=YES)

#*3838# Blinks 3D030300 in RED

#*2077# GPRS Switch

#*2027# GPRS Switch

#*0227# GPRS Switch

#*0277# GPRS Switch

#*22671# AMR REC START

#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)

#*22673# Pause REC

#*22674# Resume REC

#*22675# AMR Playback

#*22676# AMR Stop Play

#*22677# Pause Play

#*22678# Resume Play

#*77261# PCM Rec Req

#*77262# Stop PCM Rec

#*77263# PCM Playback

#*77264# PCM Stop Play

#*22679# AMR Get Time

*#8999*364# Watchdog ON/OFF

*#8999*427# WATCHDOG signal route setup

*2767*3855# = Full Reset (Caution every stored data will be deleted.)

*2767*2878# = Custom Reset

*2767*927# = Wap Reset

*2767*226372# = Camera Reset (deletes photos)

*2767*688# Reset Mobile TV

#7263867# = RAM Dump (On or Off)

Make ur windows XP genuine

Make your windows XP genuine by downloading the simple software from the below mention link and get rid of the black screen notification.

http://rapidshare.com/files/250202836/XP_genuine.rar.html


Note: This file is tested and it is virus free.