Default modem driver for CDMA phones



use the following steps if you don't have your phone's modem driver.

1. Go to -> Control Panel -> Select Phone and Modem options.

2. Install a new modem on your computer. Do not allow the computer to detect a Plug and Play modem. Instead, select the Standard 33600 modem that is available as one of the default choices. (Don't worry - it will connect at 115 kbps, not 33.6 kbps).

3. Install the modem on any COM port that is available.

4. Once the modem is installed, select it and click on Properties. Under Advanced, add the following Extra Initialization command: "AT+CRM=1" (without the quotes).

5. Go to Network Connections (or dial up networking) and create a new connection using the wizard.


NOKIA CDMA CODES

Nam Set: *3001#12345#

Software Version: *#837#

Software Version: *#9999#

CDMA Mode : *#7738#

Message sending options: *#66767#

Esn Number: *#92772689#

Current Channel: *#24#

Restart Phone: *#75681#

Restart Phone: *#75682#

Nokia 8887 Nam Programming :

Nam Set: *3001#12345#

Version: *#0000#

Evrc: *#3872#

Esn/Data/Timer: *#92772689#

SID: *#743#

Help: *#4357#

Slot Cycles: *#75681# , *#75682#

Nokia 8587 Nam Programming :

Nam Set: *#626#7764726#

A-Key: #8159357022#4579# (26 digits)

A-Key: #8159357022#4547# (20 digits)

Version: *#0000#

Version: *#837#

Vocoder: *#3872#

Change language: Menu 5, 3, 1

Change DM mode: *#7678#

Debug Screen: *#8378#

Debug: *#8380#

Field Test Menu: *#83788#

SPC Unlock, Factory Reset :

Full Factory Reset: *#7370#

Resets all settings including non-user changeable items (like SPC).


NOKIA TEST MODE:

1) Turn on the phone. Press *3001#12345#

2) Select Field Test and enable it..

3) Exit from NAM.. and restart your phone..

4) you will observe a new menu " Net Monitor "..

5) type appropriate group/display code.. ( 3101 for link info, 6101 for battery info )

6) enter 0000 to back.




Common codes for Motorola (CDMA)

Motorola 7760, 7860, 2260, 8160, etc Nam Programming:

Nam Set: Fcn,0000000000000, Rcl

Nam Set: 74663#, Fcn, Fcn

Test Mode: Fcn, 00**83786633, Sto

Motorola v60c, v120c etc Nam Programming:

Nam Set: 74663#, Menu, Menu, Spc

Nam Set: Menu, 073887, * (type quickly)

Test Mode: Menu, 073887*, Spc

Debug Mode: ##33284

Force the phone into DIGITAL ONLY mode:

1) ##33284 (Debug)

2) RIGHT Softkey (Next) Twice

3) Down arrow 10 times to “PrefMod”

4) RIGHT Softkey (Change) until you see “DigOnly”

5) LEFT softkey (Exit)

6) MENU then LEFT Softkey return to idle screen

7) ##33284 (The last 4 will not display if you have done it correctly)

Motorola t182, c210, etc Nam Programming:

Nam Set: ##1111 end

Nam Set: ##298645665 end

Short Nam: ##073887 sto

Motorola v710, v730, v740, ms150, etc Nam Programming:

Nam Set: 8378*# + press 3 times NATE (spc - 071082)

Test Mode: Menu, 073887*, Spc

Service Menu: #758353266#646#

Motorola StarTac 2004 Nam Programming:

Nam Set: 5759789*#, rec key (3)times (spc - 915037)

Motorola ms200, ms230, etc Nam Programming:

Nam Set: 5759789*# (spc - 915037)

Motorola v6060 Nam Programming:

Nam Set:147*369#456*0#

MOTOROLA TEST MODE:

v60, c120, c331, etc:

1) Turn on the phone. Press MENU 0 7 3 8 8 7 *

2) The phone will require you to “Enter a Security Code”, press 000000, OK

3) Scroll down to “Test mode” choose SELECT. Scroll down to “Enable”choose SELECT. Your phone is now in test mode.

4) Signal strength is the 3_rd number down on the left hand side of the screen.

5) To toggle between regular mode and test mode: Press MODE then

quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.

6) To turn off the test mode the phone must be in regular mode, then follow

the above sequence and scroll down to where it says “DISABLE” instead of

“ENABLE” and choose select.



Common Codes for LG (CDMA)

gc-300, etc Nam Programming:

Nam Set: Menu, 9, Spc

A-key: Press “Sto” 3sec, 2539**

lgc-330w, etc Nam Programming:

Nam Set: Menu, 4, 0, Spc

A-key: 2539**

lgc-510, v111, etc Nam Programming:

Nam Set: Menu, 3, 0, Spc

A-key: 2539**

lgc-500, 800w, etc Nam Programming:

Nam Set: Menu, 9 , 0, Spc

Debug Mode: Menu, 7, 0, Fsc

Debug Mode: Menu, 8, 0, Fsc

A-key: 2539**

Lg LX,VX-series, VX4400, VX6000, etc Nam Programming:

Nam Set: ##Spc

Nam Set: Menu, 0

Advanced Settings: ##2342

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok

A-key: ##2539,ok

Reset (Life time, Clear Memory, etc): ##786